Tag: abstract sculpture

Posted on

Art in the quarry

Zur Kunst im Steinbruch stellen 40 Künstler in der faszinierenden Umgebung des Kalksteinbruchs aus.
40 artists from Europe are exhibiting in the Altental quarry near Blaubeuren.

40 artists from Europe will be exhibiting on Art in the Quarry on Sunday, September 8, 2024 im in the Altental Quarry near Blaubeuren-Gerhausen . .

Almost white stone walls, piles of gravel, shimmering green lakes: the quarry is a work of art in itself. In a uniquely fascinating environment there will be live music, food, drink and lots of art from 10 a.m. to 6 p.m..

Playing with art in the quarry: Pretty Wild with Hans-Jörg Autenrieth, Jazzmichl, Susi and the Spiesser, Giggegugge Zurich.

Directions: In Gerhausen, coming from Ulm, turn left, coming from Blaubeuren, turn right into Markbronnerstrasse. Then follow the signs.

I also exhibit: abstract scuptures made of bronze, aluminum and shiny, colorful painted work. It will be exciting to experience their charisma in the special surroundings of the quarry. The weather forecast promises a sunny late summer day and I'm looking forward to seeing my visitors at this unique art exhibition!

Posted on

Exhibition “Shining to the Light”

The exhibition “Shining to the Light” will run from May 2nd to June 14th, 2024 in the Ostalbkreis District Office in Aalen.

Skulptur "Bewegt" auf der Ausstellung "Glänzend ans Licht" im Foyer des Landratsamts Ostalbkreis.
Bewegt, Messing, ca. 65/78/58 cm

The opening with the mountain greeting by Deputy District Administrator Karl Kurz and a wonderful introduction by Wolfgang Nussbaumer was a great pleasure. The well-attended event was perfectly rounded off by the musical contributions of Tobias Bader (saxophone) and Vitaliya Fedosenko (piano). “The detailed lecture gave the event a flair of the finest house music and concert splendor.” (Schwäbische Post, May 4, 2024)

Die Künstlerin im Gepräch auf der Ausstellung "Glänzend ans Licht" im Landratsamt Ostalbkreis.
At the vernissage in conversation with Vice District Councilor Karl Kurz and Dean Ralf Drescher
Vernissage der Ausstellung "Glänzend ans Licht" im Landratsamt Ostlabkreis.
Opening on May 2nd, 2024

Designing the airy foyer of the district office was great fun. Larger works are particularly effective here. But also for the smaller sculptures there are places that make them shine. At this exhibition, everyone “shines to the light”. This also applied to the visitors to the vernissage, who left the evening with a beaming smile.

Skulpturenpaar "Die große Leere und die kleine Freude" auf der Ausstellung "Glänzend ans Licht" im Landratsamt Ostalbkreis
The great emptiness and the small joy
Skulptur "Panta rhei" auf der Ausstellung "Glänzend ans Licht" im Landratsamt Ostalbkreis.
Panta rhei

The exhibition The exhibition can be visited until June 14th in the gallery of the district office in Aalen: Monday to Wednesday from 8 a.m. to 4 p.m., Thursdays until 6 p.m. and Fridays until 12.15 p.m.

Posted on

Bronze sculpture Two Points

Two PointsBronze, Edition 2/9, about 36/30/27 cm

Only recently did I pick up the second cast of the bronze sculpture Two Points from the foundry. And it already found a new home again. Even if I'm happy that it is now pleasing someone else, I still miss it in the studio. This seemingly simple shape has a very special charisma.

It's a long way from the first drafts to the finished sculpture. The following photos of the making of the bronze sculpture Two Points show only a small part of this path.

First draft of the sculpture Two Points

Design in plaster

I put a layer of plaster over a core made of styrofoam. The shape of the sculpture has already been found, but the surface is still very roughly worked.

Plaster model

I keep applying plaster of paris and sanding it down until the shape is really right. When the plaster model is finished, I use it to create the negative form.

Plaster model of the sculpture Two Points
Mold of the sculpture Two Points

The mold

The mold consists of an inner, soft silicone form and an outer support form made of plaster of paris. It is made around the model. Its most important property is therefore that it can be removed from the model without destroying it. In this case, two parts are sufficient. I take the negative mold and model to the foundry to have a bronze cast made of the sculpture Two Points .

Raw casting of the sculpture Two Points

Raw casting of the sculpture

The production of a bronze cast is very complex. First, a wax model is created with the negative form. The sprues are attached to this from wax. Then the wax model is repeatedly dipped in a kind of thin clay soup and dried for several days. When the clay gets fired, the wax flows out, leaving a cavity in which the bronze can be poured.

Surface treatment of the bronze casting

After casting, the clay must be knocked off on the outside and inside. Holes have to be cut in a closed shape like this so that the clay on the inside can be removed. Then the holes are welded shut again. I took on the surface treatment of the bronze sculpture Two Points with file and sandpaper. I like to work by hand because it gives me a better feel for the smoothness and tension of the surface.

The raw casting is filed and ground.
Abstrakte Skulptur mit runden Formen und zwei Spitzen aus Bronze, braun patiniert.
Two Points, Bronze, about 38/28/31 cm

Patinating the bronze sculpture Two Points

For the final surface treatment, I bring the sculpture back to the foundry. Patinating is an art in itself. With the help of various chemicals, the bronze reacts and changes its color. In this case, the Art foundry Kollinger brought out a beautiful red-brown color.

Posted on

At the end of a long life

At the end of a long life was featured at the online exhibition On being by Sculptors Allinace in New York. For the panel talk about the exhibition, I tell you how this piece was created: where I found the wood, how I designed the shape, which tools I used and which supposed disappointment ultimately defines the special character of the sculpture.

The wood was given to me by friends. Their cherry tree had lost a branch. They had already sawed into firewood when I discovered it. At the beginning I design a new sculpture with a small piece of modeling clay. Then I saw the wood into shape with the chainsaw, using the clay model as a template. At one point the piece comes to life. I put the model aside and let the lines and curves of the wood guide me. This part of the job is what I enjoy most because it is no longer my mind but my soul that takes the lead. At the same time, however, the most exhausting part of my journey is with a new piece.

I switch from chainsaw to file and then to sandpaper. I love running my hands over the smooth surfaces and following the lines of the piece. This pleasure always seduces me to strive for perfection. In this case, the perfection was destroyed when the wood dried, as small cracks opened and distorted the smooth surfaces. At first I was disappointed, but soon this became the feature I value most about this piece because it reminds me of an old person.

Life inflicts physical and emotional wounds on us. In other places it grinds us smooth, makes us gentle. Everything about a person is a testimony to his life. The way we run, the way we hold our heads, the arching of our backs, the wrinkles on our faces: all of this tells of the difficulties we faced, how we dealt with them and how we live today.

So the name for this piece came naturally: At the end of a long life it shows both wounds and smoothness, like we do as humans.